27 ?d 2 bfe l american 5-6 8 10 8 10 1/4 5/16 3/8 7/16 3-4 5-6 8 10 1/4 5/16 3/8 3/8 3/8 stud size standard part no. tool no. qty/box dimensions mm (in.) metric applicable wire awg# (mm 2 ) 22 to 16 (0.25 to 1.65) 16 to 14 (1.04 to 2.63 ) 16 to 14 (1.04 to 2.63) 3.5 4 5 4 5 6 8 10 12 3 3.5 4 5 6 8 9 10 10 1.25-3e 1.25-4e 1.25-5e 2-4e 2-5e 2-6e 2-8e 2-10e 2-12e 2-3.2es 2-3es 2-4es 2-5ES 2-6es 2-8es 2-9es 2-10es 2-l10es 8.0 (.315) 8.0 (.315) 8.0 (.315) 9.2 (.362) 9.2 (.362) 13.6 (.535) 13.6 (.535) 13.6 (.535) 19.0 (.748) 7.1 (.280) 7.1 (.280) 8.7 (.343) 8.7 (.343) 13.5 (.532) 13.5 (.532) 13.5 (.532) 13.5 (.532) 19.0 (.748) 16.4 (.646) 16.4 (.646) 16.4 (.646) 18.6 (.732) 18.6 (.732) 25.3 (.996) 25.3 (.996) 25.3 (.996) 33.0(1.299) 15.4 (.606) 15.4 (.606) 17.8 (.701) 17.8 (.701) 24.2 (.953) 24.2 (.953) 24.2 (.953) 24.2 (.953) 31.6(1.244) 7.6 (.299) 7.6 (.299) 7.6 (.299) 7.2 (.284) 7.2 (.284) 11.7 (.461) 11.7 (.461) 11.7 (.461) 16.7 (.657) 5.7 (.224) 5.7 (.224) 7.3 (.287) 7.3 (.287) 11.3 (.445) 11.3 (.445) 11.3 (.445) 11.3 (.445) 16.0 (.630) 4.8 (.189 ) t ?d d 1 yht-2210 ya-1,ya-2 ya-4 bct-0514 yht-2210 ya-1 ya-2 ya-4 bct-0514 1,000 500 1,000 1,000 500 3.7 (.146) 4.3 (.169) 5.3 (.209) 4.3 (.169) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 13.0 (.512) 3.2 (.126) 3.7 (.146) 4.3 (.169) 5.3 (.209) 6.4 (.252) 8.4 (.331) 9.8 (.386) 10.5 (.413) 10.5 (.413) 6.8 (.268) 6.2 (.244) 4.0 (.157) 5.5 (.217) 5.5 (.217) 1.9 (.075 ) 2.3 (.091) 3.0 (.118) 1.0 (.039 ) 1.6 (.063) 1.2 (.047) e type es type note :1 ) the ?d of products with the suffix "e" at the end of the part number is one size larger than the non-insulated terminal with th e same part number. for the crimping tool jaws, select one size larger from among the three jaw sizes on the yht-2210 crimping tool. 2 ) contact jst concerning minimum lot size. 3 ) the part numbers indicated in the above table are for products with a brazed seam. when ordering products with a butted seam, add the prefix "ws" to the part number ( ex. 2-4e ?> ws2-4e ) . 4 ) delivery lead times may vary depending on the product. contact jst for details. solderless terminals ring tongue (r type) non-insulated (heavy duty) t ?d 2 l fe b ?d 1 ?d brazed seam
|